Products

61 product references

PMR Waterborne intumescent coating for timber
PMR

PMR Waterborne intumescent coating for timber

A waterborne intumescent coating for specified timber doors, cabinetry and furniture systems. Heat triggers a porous insulating char layer; a compatible topcoat protects the finish.

HCF Non-intumescent protection for structural steel
HCF

HCF Non-intumescent protection for structural steel

A spray-applied passive protection material based on cement, vermiculite and mineral components, for interior and exterior steel columns, beams and frames.

PMA Interior intumescent coating for structural steel
PMA

PMA Interior intumescent coating for structural steel

A waterborne intumescent coating for interior steel columns, beams, frames and trusses, specified with compatible primer and protective finishing coats.

PMS Exterior intumescent coating for structural steel
PMS

PMS Exterior intumescent coating for structural steel

An exterior intumescent steel-protection system for industrial, marine and humid environments, designed together with a compatible primer and sealing topcoat.

UH-Mortar Thermal and acoustic mineral plaster
UH-Mortar

UH-Mortar Thermal and acoustic mineral plaster

A mineral plaster combining high-performance cement and insulating minerals, for thermal, acoustic and finish-support functions on walls, ceilings and building substrates.

TB201 Hollow-microsphere thermal-barrier finish
TB201

TB201 Hollow-microsphere thermal-barrier finish

A hollow-microsphere thermal-barrier finish for coloured roofs and walls, used as a surface layer within a coordinated thermal-management system.

TB301 White reflective cool-roof coating
TB301

TB301 White reflective cool-roof coating

A white reflective finish intended to reduce solar heat absorption at the roof surface, for industrial buildings, warehouses and large roof areas.

Basalt mineral decorative wall coating

Basalt mineral decorative wall coating

A decorative wall coating formulated with basalt powder, inorganic materials and polymer components, for mineral-textured interior and exterior finishes.

PUR700+ Spray-applied polyurea waterproofing
PUR700+

PUR700+ Spray-applied polyurea waterproofing

A two-component spray-applied polyurea elastomer forming a continuous, seamless waterproof membrane using specialist equipment, for concrete protection in building and infrastructure work.

Additional coatings & components

FY-001D-3 Single-component colour-fixing primer
FY-001D-3

FY-001D-3 Single-component colour-fixing primer

A single-component colour-fixing primer in the wood range for discussing colour stability and subsequent clear finishing layers.

KL-101 Acrylic exterior paint
KL-101

KL-101 Acrylic exterior paint

An acrylic exterior reference in the Myanmar shipment record for model-specific facade purchasing, repeat orders and sample comparisons.

KL-207 Interior ceiling emulsion paint
KL-207

KL-207 Interior ceiling emulsion paint

An interior ceiling emulsion reference listed for Myanmar, supported by an actual packaging photo showing KL-207 in the batch label.

KL-208 General-purpose emulsion finish
KL-208

KL-208 General-purpose emulsion finish

A general-purpose emulsion finish listed in the Myanmar shipment sheet, providing an identifiable reference for routine wall-paint inquiries.

KL-209 Low-odour multifunctional wall paint
KL-209

KL-209 Low-odour multifunctional wall paint

Listed as a low-odour multifunctional wall paint with an anti-formaldehyde product name in the original shipment sheet; use KL-209 to request the applicable specification.

KL1001 Matt interior project paint
KL1001

KL1001 Matt interior project paint

A budget-oriented matt interior finish for project walls, described as a white acrylic coating with straightforward application.

KL1002 Low-odour mildew-resistant interior paint
KL1002

KL1002 Low-odour mildew-resistant interior paint

An interior paint balancing hiding, a matt finish and mildew-resistance priorities for homes and everyday spaces, with white and light shades described.

KL1003 Silk-finish interior wall paint
KL1003

KL1003 Silk-finish interior wall paint

An interior wall and ceiling finish emphasizing soft sheen, levelling and scrub resistance for a refined decorative appearance.

KL1101 Exterior project coating
KL1101

KL1101 Exterior project coating

An acrylic finish for large exterior projects, emphasizing hiding, a matt appearance and single-component application for budget-conscious specification.

KL1102 Pure-acrylic waterborne exterior coating
KL1102

KL1102 Pure-acrylic waterborne exterior coating

A pure-acrylic waterborne exterior finish for weather, alkali and water resistance requirements, with matt or gloss finish options.

KL1103 Weather-resistant self-cleaning exterior coating
KL1103

KL1103 Weather-resistant self-cleaning exterior coating

A silicone-modified exterior coating focused on reduced dirt adhesion and water-vapour permeability for projects with facade-maintenance priorities.

KL1104 Heat-reflective exterior wall coating
KL1104

KL1104 Heat-reflective exterior wall coating

A facade coating using solar and near-infrared reflection and thermal-emission design to support heat-management assessment with architectural colour selection.

KL1201 Single-component polishing putty
KL1201

KL1201 Single-component polishing putty

A fine smoothing putty for thin finishing layers beneath metallic and fluorocarbon coatings where substrate smoothness is important.

KL1202 Single-component exterior levelling putty
KL1202

KL1202 Single-component exterior levelling putty

A powder exterior levelling material for cement render and concrete, preparing an even base for the primer and finish.

KL1203 Moisture-resistant exterior putty
KL1203

KL1203 Moisture-resistant exterior putty

A powder putty emphasizing moisture resistance as part of exterior surface levelling and preparation.

KL1204 Two-component elastic exterior putty
KL1204

KL1204 Two-component elastic exterior putty

A powder-and-liquid exterior putty addressing flexibility and crack-management needs, referenced in multiple decorative facade systems.

KL1300 General-purpose emulsion primer
KL1300

KL1300 General-purpose emulsion primer

An emulsion primer listed in the Myanmar shipment record, available as a reference for wall-system inquiries and sampling discussions.

KL1301 Low-odour waterborne interior primer
KL1301

KL1301 Low-odour waterborne interior primer

An interior sealing and alkali-resistant primer supporting adhesion and more even absorption before the finish; also listed in the Myanmar shipment sheet.

KL1302 Waterborne alkali-resistant exterior primer
KL1302

KL1302 Waterborne alkali-resistant exterior primer

A sealing exterior primer emphasizing alkali resistance, resistance to salt migration and adhesion, referenced across several facade and stone-effect systems.

KL1303 Black waterborne primer
KL1303

KL1303 Black waterborne primer

Provides a black ground within a sealing primer system where joints or decorative textures require a dark background.

KL1304 Coloured system primer
KL1304

KL1304 Coloured system primer

Provides a coordinated ground colour beneath decorative finishes while contributing to substrate sealing and alkali protection.

KL1305 Architectural joint-line coating
KL1305

KL1305 Architectural joint-line coating

A coating for architectural joint lines, described with penetration, alkali/salt resistance and UV-resistance characteristics for defined facade divisions.

KL1306 Waterborne penetrating reinforcement primer
KL1306

KL1306 Waterborne penetrating reinforcement primer

A penetrating reinforcement and sealing primer for suitable powdery renovation substrates, listed as an interface agent in the Myanmar sheet.

KL1307 Waterborne epoxy primer
KL1307

KL1307 Waterborne epoxy primer

An epoxy primer option for projects requiring water resistance, adhesion and careful treatment of alkaline or salt-affected substrates.

KL1401 Sand-texture intermediate coating
KL1401

KL1401 Sand-texture intermediate coating

Builds a coarse sand-texture intermediate layer as the dimensional base for a complete exterior finishing system.

KL1402 Relief-texture intermediate coating
KL1402

KL1402 Relief-texture intermediate coating

Creates sprayed or pressed relief textures with the pattern controlled by tools and application technique.

KL1403 Roller-texture intermediate coating
KL1403

KL1403 Roller-texture intermediate coating

Forms raised roller and orange-peel textures as an intermediate layer in an exterior coating system.

KL1404 Elastic high-build intermediate coating
KL1404

KL1404 Elastic high-build intermediate coating

Combines high-build texture with flexibility as an intermediate option for elastic exterior systems.

KL1501 Metallic curtain-wall-effect coating
KL1501

KL1501 Metallic curtain-wall-effect coating

Creates a metallic architectural finish for facades seeking curtain-wall-like visual depth through a coating system.

KL1502 Ceramic-composite waterborne fluorocarbon coating
KL1502

KL1502 Ceramic-composite waterborne fluorocarbon coating

A waterborne fluorocarbon finish for cementitious surfaces, emphasizing weather resistance and self-cleaning in demanding facade specifications.

KL1588 Waterborne stain-resistant clear sealer
KL1588

KL1588 Waterborne stain-resistant clear sealer

A clear protective sealer for stone-effect and textured finishes, intended to protect the decorative layer and reduce dirt adhesion.

KL1601 Sandstone-texture coating
KL1601

KL1601 Sandstone-texture coating

Graded sand creates sandstone and worked textures for facades where tactile architectural character is central to the design.

KL1688 Waterborne clear sealer for metallic finishes
KL1688

KL1688 Waterborne clear sealer for metallic finishes

A waterborne clear protective finish for metallic effects, selected together with the metallic coating and intended sheen.

KL1701 Natural coloured-sand stone-effect coating
KL1701

KL1701 Natural coloured-sand stone-effect coating

Natural coloured granules create a textured stone appearance, with fine or coarse effects selected by sample for residential and public facades.

KL1702 Granite-flake stone-effect coating
KL1702

KL1702 Granite-flake stone-effect coating

Combines coloured sand and flakes for layered granite effects on villas, commercial buildings and public facades.

KL1703 Jade-stone-effect decorative coating
KL1703

KL1703 Jade-stone-effect decorative coating

Combines basalt granules, natural sand and a silicone-modified acrylic system for a jade-like architectural texture.

KL1901 Stain-resistant elastic exterior coating
KL1901

KL1901 Stain-resistant elastic exterior coating

An exterior finish balancing film strength and flexibility for projects concerned with fine surface cracking and facade cleanliness.

KL1902 High-elasticity stain-resistant exterior coating
KL1902

KL1902 High-elasticity stain-resistant exterior coating

A silicone-modified elastic system emphasizing water repellence, stain resistance and resistance to mildew and algae for maintained exterior facades.

KL1903 Multifunctional acrylic elastic exterior coating
KL1903

KL1903 Multifunctional acrylic elastic exterior coating

An acrylic elastic facade system combining weather resistance with flexibility where fine-crack management matters.

KL2001 Water-in-water multicolour stone-effect coating
KL2001

KL2001 Water-in-water multicolour stone-effect coating

A water-in-water multicolour coating for relatively smooth granite patterns, with colour composition selected through sample panels.

KL2002 Sand-in-water multicolour stone-effect coating
KL2002

KL2002 Sand-in-water multicolour stone-effect coating

Combines a sandy texture with multicolour granite patterns for a more tactile and layered facade finish.

KL3001 Brick-effect architectural coating
KL3001

KL3001 Brick-effect architectural coating

Uses coating texture and joint layout to create a brick appearance for projects specifying an applied architectural finish.

PU-009D-3 PU clear wood primer
PU-009D-3

PU-009D-3 PU clear wood primer

A PU clear primer for transparent wood finishing, with a corresponding hardener listed in the shipment sheet for system purchasing.

PU-009DH-3 Hardener for PU clear wood primer
PU-009DH-3

PU-009DH-3 Hardener for PU clear wood primer

The hardener reference corresponding to PU-009D-3, separately identifiable in purchasing lists to reduce mismatched components.

PU-06GATT-5 Colour-stability PU high-gloss clear finish
PU-06GATT-5

PU-06GATT-5 Colour-stability PU high-gloss clear finish

A high-gloss clear wood finish reference for projects prioritizing visible grain, surface smoothness and a polished appearance.

PU-06GATTH-5 Hardener for PU high-gloss clear finish
PU-06GATTH-5

PU-06GATTH-5 Hardener for PU high-gloss clear finish

A clear-finish hardener paired with PU-06GATT-5 in the shipment list for complete-system ordering and reference tracking.

PU-103D Grey anti-rust primer
PU-103D

PU-103D Grey anti-rust primer

A grey anti-rust primer in the Myanmar shipment record, with an actual bucket label identifying PU-103D and Grey Anti-rust Primer.

PU-106D Red-oxide anti-rust primer
PU-106D

PU-106D Red-oxide anti-rust primer

A red-oxide anti-rust primer listed in the shipment sheet, providing a model-specific option for metal primer selection.

PU-18GTT Colour-stability PU gloss white finish
PU-18GTT

PU-18GTT Colour-stability PU gloss white finish

A gloss white wood-finish reference for sample assessment of whiteness, hiding and a high-gloss appearance.

PU-18GTTH Hardener for PU gloss white finish
PU-18GTTH

PU-18GTTH Hardener for PU gloss white finish

The hardener listed with PU-18GTT gloss white finish, supporting matched-component ordering.

PU-888-1 Low-odour PU thinner
PU-888-1

PU-888-1 Low-odour PU thinner

A thinner reference in the PU wood-coating range for ordering base coating, hardener and application-adjustment materials together.

ZG-03DB-1 Air-drying transparent wood putty
ZG-03DB-1

ZG-03DB-1 Air-drying transparent wood putty

A transparent putty in the wood-finishing range for discussing filling requirements beneath clear finishes that retain the wood grain.

Coating products | KOALA