PMR
Fire-protection coatings

PMR Waterborne intumescent coating for timber

A waterborne intumescent coating for specified timber doors, cabinetry and furniture systems. Heat triggers a porous insulating char layer; a compatible topcoat protects the finish.

PMR厨房与木器应用组合PMR厨房与木器应用组合

PMR厨房与木器应用组合

Material & applications

Product designation

SMT-S/PMR · Intumescent decorative fire-protection coating for timber

Waterborne protection for timber

PMR is an intumescent coating for timber doors, cabinetry and furniture. Heat produces a porous insulating char layer. The formulation contains no APEO or halogens. Performance depends on timber, application rate, thickness and the protective finish. BS476-7 and EN13501-1 C-s2,d0 evaluations must be matched to their tested substrates and conditions; a surface coating does not establish the rating of a complete door.

Intumescence under heat

Intumescence under heatIntumescence under heat

Intumescence under heat

Porous insulating structure

Porous insulating structurePorous insulating structure

Porous insulating structure

Coating test scene

Coating test sceneCoating test scene

Coating test scene

Charred specimen

Charred specimenCharred specimen

Charred specimen

Technical data

Technical data, packaging & storage

PropertyDataConditions
Density1.2 g/cm³
Weight solids64±2%ISO3233-1998
VOCApprox. 15 g/LEN ISO11890-1
Shelf life12 months, sealed in cool, dry conditions
Theoretical consumptionApprox. 500 g/m²300 μm dry film; application and conditions affect usage
CuringApprox. 24 h per coat20°C, 65% RH; cold, humidity and thickness extend curing
Storage5–30°C; sealed, frost-free12 months
Packaging6, 10 or 25 kg pails
ColourWhiteCompatible finish selected separately

Application & system

Preparation and application

Timber moisture must be no more than 15%. Remove dust, grease, adhesive, moisture and incompatible old coatings. Stir thoroughly. Apply by brush, roller or spray; airless nozzle 0.013–0.015 inch, air-spray nozzle no larger than 2 mm. Define consumption and dry-film thickness for the required system.

Protective finish

Allow PMR to dry completely before topcoating. Use a compatible finish against moisture and environmental exposure. For unavoidable outdoor work, avoid rain and apply CHNITHERM TOP726 after drying. Limited rain resistance is not a substitute for a long-term waterproofing design.

Timber-door applications

Timber-door applicationsTimber-door applications

Timber-door applications

Drying & curing

Drying and curing

Each coat cures in approximately 24 hours at 20°C and 65% RH. The matrix is in hours and distinguishes wet-film thickness, humidity, temperature and air movement. Low temperature, high humidity and thicker films extend drying.

Drying-time matrix

Drying times in hours; wet-film thickness in mm.
RHWet film10°C still10°C airflow20°C still20°C airflow30°C still30°C airflow
30%0.3 mm62.54241.5
30%0.6 mm83.56352.5
30%1.2 mm124.58463
50%0.3 mm1036351.5
50%0.6 mm1248463
50%1.2 mm186125103.5
70%0.3 mm12610583
70%0.6 mm189127106
70%1.2 mm2412189127

Conditions & precautions

Conditions and storage

Coating, substrate and ambient temperature must be at least 10°C; RH no more than 80%, with temperature at least 3°C above dew point. Protect the full system from rain until completely dry. PMR is water-sensitive, especially to running water. Store sealed at 5–30°C, protected from frost and sunlight. Do not discharge into water, drains or soil; follow the applicable SDS.

Documents & specification support

Specify for your project.

Share the application, substrate, area and performance requirements to discuss a coordinated system.

Contact the factory