Architectural coatings catalogue
Interior and exterior coatings, decorative finishes, primers, putties, intermediates and protective sealers.
Product selection
Review applications and companion materials by model, then request the TDS, SDS and applicable documents for your substrate and conditions.
内外墙涂料产品目录 / Architectural coatings catalogue
Application guides
Brochures, TDS, SDS and test reports: what each establishes
Separate product introductions, application data, safety information and performance evidence when assessing a coating system.
A coating buyer's checklist: from bucket price to system cost
Build a useful inquiry even without a coatings background: define the substrate, exposure, appearance, system, quantity and documentation.
Questions
Related products
KL1001 Matt interior project paint
A budget-oriented matt interior finish for project walls, described as a white acrylic coating with straightforward application.
KL1688 Waterborne clear sealer for metallic finishes
A waterborne clear protective finish for metallic effects, selected together with the metallic coating and intended sheen.
KL1305 Architectural joint-line coating
A coating for architectural joint lines, described with penetration, alkali/salt resistance and UV-resistance characteristics for defined facade divisions.
KL1302 Waterborne alkali-resistant exterior primer
A sealing exterior primer emphasizing alkali resistance, resistance to salt migration and adhesion, referenced across several facade and stone-effect systems.
KL1301 Low-odour waterborne interior primer
An interior sealing and alkali-resistant primer supporting adhesion and more even absorption before the finish; also listed in the Myanmar shipment sheet.
KL1502 Ceramic-composite waterborne fluorocarbon coating
A waterborne fluorocarbon finish for cementitious surfaces, emphasizing weather resistance and self-cleaning in demanding facade specifications.
KL1703 Jade-stone-effect decorative coating
Combines basalt granules, natural sand and a silicone-modified acrylic system for a jade-like architectural texture.
KL1601 Sandstone-texture coating
Graded sand creates sandstone and worked textures for facades where tactile architectural character is central to the design.
KL1402 Relief-texture intermediate coating
Creates sprayed or pressed relief textures with the pattern controlled by tools and application technique.
KL1103 Weather-resistant self-cleaning exterior coating
A silicone-modified exterior coating focused on reduced dirt adhesion and water-vapour permeability for projects with facade-maintenance priorities.
KL1588 Waterborne stain-resistant clear sealer
A clear protective sealer for stone-effect and textured finishes, intended to protect the decorative layer and reduce dirt adhesion.
KL1101 Exterior project coating
An acrylic finish for large exterior projects, emphasizing hiding, a matt appearance and single-component application for budget-conscious specification.
KL1901 Stain-resistant elastic exterior coating
An exterior finish balancing film strength and flexibility for projects concerned with fine surface cracking and facade cleanliness.
KL1202 Single-component exterior levelling putty
A powder exterior levelling material for cement render and concrete, preparing an even base for the primer and finish.
KL1404 Elastic high-build intermediate coating
Combines high-build texture with flexibility as an intermediate option for elastic exterior systems.
KL1002 Low-odour mildew-resistant interior paint
An interior paint balancing hiding, a matt finish and mildew-resistance priorities for homes and everyday spaces, with white and light shades described.
KL1902 High-elasticity stain-resistant exterior coating
A silicone-modified elastic system emphasizing water repellence, stain resistance and resistance to mildew and algae for maintained exterior facades.
KL1702 Granite-flake stone-effect coating
Combines coloured sand and flakes for layered granite effects on villas, commercial buildings and public facades.
KL1903 Multifunctional acrylic elastic exterior coating
An acrylic elastic facade system combining weather resistance with flexibility where fine-crack management matters.
KL1403 Roller-texture intermediate coating
Forms raised roller and orange-peel textures as an intermediate layer in an exterior coating system.
KL1104 Heat-reflective exterior wall coating
A facade coating using solar and near-infrared reflection and thermal-emission design to support heat-management assessment with architectural colour selection.
KL1201 Single-component polishing putty
A fine smoothing putty for thin finishing layers beneath metallic and fluorocarbon coatings where substrate smoothness is important.
KL1203 Moisture-resistant exterior putty
A powder putty emphasizing moisture resistance as part of exterior surface levelling and preparation.
KL3001 Brick-effect architectural coating
Uses coating texture and joint layout to create a brick appearance for projects specifying an applied architectural finish.
KL1304 Coloured system primer
Provides a coordinated ground colour beneath decorative finishes while contributing to substrate sealing and alkali protection.
KL2001 Water-in-water multicolour stone-effect coating
A water-in-water multicolour coating for relatively smooth granite patterns, with colour composition selected through sample panels.
KL1204 Two-component elastic exterior putty
A powder-and-liquid exterior putty addressing flexibility and crack-management needs, referenced in multiple decorative facade systems.
KL1501 Metallic curtain-wall-effect coating
Creates a metallic architectural finish for facades seeking curtain-wall-like visual depth through a coating system.
KL1306 Waterborne penetrating reinforcement primer
A penetrating reinforcement and sealing primer for suitable powdery renovation substrates, listed as an interface agent in the Myanmar sheet.
KL1303 Black waterborne primer
Provides a black ground within a sealing primer system where joints or decorative textures require a dark background.
KL1307 Waterborne epoxy primer
An epoxy primer option for projects requiring water resistance, adhesion and careful treatment of alkaline or salt-affected substrates.
KL2002 Sand-in-water multicolour stone-effect coating
Combines a sandy texture with multicolour granite patterns for a more tactile and layered facade finish.
KL1102 Pure-acrylic waterborne exterior coating
A pure-acrylic waterborne exterior finish for weather, alkali and water resistance requirements, with matt or gloss finish options.
KL1003 Silk-finish interior wall paint
An interior wall and ceiling finish emphasizing soft sheen, levelling and scrub resistance for a refined decorative appearance.
KL1701 Natural coloured-sand stone-effect coating
Natural coloured granules create a textured stone appearance, with fine or coarse effects selected by sample for residential and public facades.
KL1401 Sand-texture intermediate coating
Builds a coarse sand-texture intermediate layer as the dimensional base for a complete exterior finishing system.
